dp001
When pneumatic pumps are not an option, these electric-powered diaphragm pumps offer automatic demand control and operate only when liquid flow is required.
Duplex diaphragm design eliminates troublesome shaft seals. Excellent self-priming capability allows pump positioning above liquid. Corrosion-resistant polypropylene construction puts no metal parts in contact with pumped liquid. Handles small foreign particles such as resin, dust, dirt, etc. Recommended use with in-line strainer.
Must be properly grounded to prevent electrical shock. Supplied with grounding conductor and grounding-type attachment plug.
SPECIFICATIONS:
? Pump Design: Duplex diaphragm
? Materials: Housing: Reinforced polypropylene
Elastomers: Santoprene? (UV inks), Viton? (multipurpose)
? Pressure Switch: Off @ 60 PSI (4.1 bar)
On @ 40 PSI (2.8 bar)
? Temperature: Minimum = 45oF (7oC)
Maximum = 160oF (71oC)
? Ports: 3/8 NP
? Motor: 115V AC, 50/60Hz cycle
? Current: .55 A (maximum)
? Weight: 4 lbs (1.8 kg)
? Flow Rate: 2 GPM (7.5 L/min)
IMPORTANT: Not intended for high flash point fluids (i.e. solvents and such).